Oil immersed transformer
oil immersed current transformer
oil immersed distribution transformer
oil immersed hermetically sealed type transformer
oil immersed power transformer
oil immersed current transformer
oil immersed distribution transformer
oil immersed hermetically sealed type transformer
oil immersed power transformer
60-second manual response
24 hours free plan
Production quality checks at every level

1000~2000KVA Three-Phase Oil-Immersed Transformer

The three-phase oil-immersed distribution transformers feature different voltages and power ratings up to 6,000 KVA (10 MVA available on request). These highly efficient and reliable transformers provide the required electrical power supply without breakage or interruption.
Type:
Oil Immersed Transformer
Primary Voltage:
10~35kV
Product Details
Parameter
Advantage
Service
Message
application Details
oil immersed self cooled transformer

The Oil Immersed Transformer series are the kind of the transformer with low noise, low loss and low partial discharge. With rational structure, high-quality material, scientific design, strict craftsmanship and advanced test method, the characteristics of this series products are as follows:


- Excellent dynamic thermal stability, outstanding short-circuit resistance, high lighting impulse resistance, high reliability.
- With excellent overload capacity, it can long-term operate under 110% load.
- Low lose, energy conservation, run economically and maintenance free.
- Contour artistic, compact size, low installation and maintenance costs.
- Performance and parameter conform to or excel the standards of IEC.
- Fully Hermetically oil tank, effectively preventing air from eroding oil and prolonging the service life of the transformer

Advantage:
- Low loss, low noise, low partial discharge, high reliability
- Powerful anti-short circuit capacity, high anti-lightning impulse capacity
- HV coil is Vacuum casted with epoxy resin with pressure, capabilities for better the cast without pressure.
- Simulating analys is being used in the core model, the resonance can be avoided and the noise is reduced.
- Simulation calculation and analysis of lightning impulse wave are applied to HV Coils; anti-lightning impulse capability is improved.


Process Technology:
Core:

- Our transformer's core is made of high quality cold rolled grain oriented silicon steel sheet with high magnetic permeability. It is using full 45° slope lamination, so that the noload loss and the no-load current are reduced efficiently.

LV Winding:

- LV windings are adopting superior foil conductors or made of 100% copper wire, thus to obtain better amperturn balance and reduce more transverse magnetic flux leakage. Then to greatly improves transformer's anti-short circuit capability.
- Excellent design of oil passage structure, greatly increasing the coils' heat dispersion effect. It helps to decrease temperature rise of the LV winding and improve transformers' overload capability.

HV Winding

- HV windings are made of superior copperconductor wires. Adopting fiberglass to reinforced insulation.
- HV windings are adopted optimized structure to improve transformer's distribution of electric field.

- We use our existing technology calculate and analysis Lightning wave process simulation. Then substantially improving product's antilighting capability.

Insulation construction:

- Aclass level Insulation construction. The high-voltage coil and low-voltage coil are placed with the same center. Between the coils, use the thin paper cylinder with little oil clearance construction.

Tank:

- The tank is jointed with highquality steel. The surface is eliminated rust phosphate coating and painted with the type of FVC anticorrosive paint. It has ability to prevent the corrosion from oil and chemical matter. It can be broadly applied to outdoors with bad environment for its contour artistic, easily installation and maintenance free.
technical parameter
Oil immersed transformer

Model

SZ11-6.3 MVA-33/33KV

Type

Oil Immersed Power Transformer

Standard

IEC60076

Rated Power

6.3 MVA

Frequency

50 HZ

Phase

Three

Cooling Type

ONAN

Primary Voltage

33 KV

Secondary Voltage

33 KV

Winding Material

Copper

Vector Group

Ynyn0

Impedance

5%

Tap Changer

OLTC

Tapping Range

+4 and-12 *1.25% @ Primary Side

No Load Loss

6 KW

On Load Loss

55 KW

Accessories

Standard Configuration

Remarks

N/A

Product Display

Product Application


Our Factory

Workplace

Package&Shipping

our Service
Gnee Silicon Steel Provide
One-stop Service
Message
Get In tTouch With Us Quickly
Related Products
Grain Oriented Silicon Steel Coil
Related Products
Application:Power, Electronic, Instrument, Lighting, Rectifier, Audio
Cooling Method:Oil-immersed Type Transformer
Application:Power, Electronic, Power Transformer
Core:Core-type Transformer